Middle Tennessee Office Products and Supplies - Middle Tennessee Office Products

Commercial The MULE (Modified Urethane Latex Epoxy), Interior/Exterior, Gloss Silver Gray, 1 gal Bucket/Pail, 2/Carton

Manufacturer: RUST-OLEUM CORPORATION
SKU: RST375642
Manufacturer part number: 375642
UPC: 0020066011717
MSRP: $116.00
$87.65
The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy (MULE) features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula. Paint Sub-Category: Epoxy; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Gloss; Color(s): Silver Gray.
The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy (MULE) features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula. Paint Sub-Category: Epoxy; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Gloss; Color(s): Silver Gray.
Products specifications
Attribute nameAttribute value
Color FamilyGray
Footnote 1Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil
Disclaimer StatementFor best results, apply within the recommended Application Temperature Range (50° to 90° F) when the surface temperature is also at least 5° F (3° C) above the dew point and the relative humidity is not greater than 85%.
Color(s)Silver Gray
Compliance StandardsVOC Compliant
Footnote 2Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil
Application Temperature Range50° to 90° F
Intended Application EnvironmentInterior/Exterior
Finish/SheenGloss
Binder/Vehicle Ingredient(s)Modified Urethane Latex Epoxy
Maximum Coverage Area155 to 330 sq ft
Cure/Dry-Time Range7 days (Full Cure)
*
*
*
Products specifications
Attribute nameAttribute value
Color FamilyGray
Footnote 1Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil
Disclaimer StatementFor best results, apply within the recommended Application Temperature Range (50° to 90° F) when the surface temperature is also at least 5° F (3° C) above the dew point and the relative humidity is not greater than 85%.
Color(s)Silver Gray
Compliance StandardsVOC Compliant
Footnote 2Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil
Application Temperature Range50° to 90° F
Intended Application EnvironmentInterior/Exterior
Finish/SheenGloss
Binder/Vehicle Ingredient(s)Modified Urethane Latex Epoxy
Maximum Coverage Area155 to 330 sq ft
Cure/Dry-Time Range7 days (Full Cure)